1 / 3
STATO® Brackets Standard version | hot-dip galvanised

STATO® Brackets

STATO® Bracket, standard version, hot-dip galvanised

Display variants as list
Reset selection
Art.no.: 129168
Design: Standard version
Surface: hot-dip galvanised
Sales unit: 5 Pieces
Weight/item: 3.200 kg

Field of application

  • Stable support system with high load-bearing capacity for pipe installations
  • Ideal pipe anchor point in combination with STATO® Clamps without lining
  • Ideal as height adjustable subframe for anchor and expansion assemblies
  • Ideal as an anchor point for insulated chilled water pipes in combination with MÜPRO® Wooden blocks and STATO® Clamps

Advantages

  • Continuously adjustable in height and slope
  • Can be fitted with up to 3 STATO® Clamps in case of heavy loads
  • Especially suitable for heavy pipes with large wall clearances
  • Can be used as a bearing block, adjustable in height and slope
Material:
Steel
eCl@ss 11.1:
23-35-01-90
Design:
Standard version
Product type:
Anchor points
Customs tariff number:
73269060
Surface:
hot-dip galvanised
Adjustment range:
56 mm
Basic data text:
STATO® Bracket, standard version, hot-dip galvanised
eCl@ss 7.1:
23-35-01-90
Scope of supply:
STATO® Brackets 1 kit consisting of: 4 STATO® Angle pieces, 6 Coach bolts M12, 6 Hexagonal nuts M12, 6 Washers for M12. All parts are hot-dip galvanised.
Overall height [mm]:
96 - 152 mm